Bio Ethanol Fireplace Biofire Fire B2C Professional Portal Unit BLACK WITH GLASS

  

Classic Portal Bio ethanol Fireplace. The elegant straight line makes it a perfect match for classic and modern rooms. It is made of the highest quality materials - restoration in varnished MDF board, and the hearth of the highest quality steel. Such high quality of workmanship in combination with the classic form of the product makes the product perfectly imitate a traditional fireplace. However, unlike traditional devices, it does not require connection to a fireplace flue, and the fuel burns odourless, smokeless and leaves no ash, which makes its use simple and pleasant.

The device is equipped with a burner with smooth flame regulation, in which a safe bio-insert has been placed, which perfectly protects against spilling bio fuel and increases the quality and comfort during use. The extremely capacious burner with which the fireplace of the bio fireplace is equipped, makes the fire burn much longer than in standard bio fireplaces. The burner is made of stainless steel with a continuous line of fire with a total length of 500 mm, which has. Dedicated glass for the portal series biofireplaces. Perfectly shields the flame, increasing comfort and safety during use.

The glass is mounted on two guides included in the set. The glass is installed by screwing the handles to the bio-fireplace, and then placing the glass on them. When using the bio-fireplace, it is not necessary to disassemble the glass. The gap left at the bottom allows for adequate air circulation necessary to maintain the flame and at the same time for free regulation or extinguishing of the flame.

Dimensions: 113 cm x 100.4 cm x 30 cm. Housing material: powder coated steel, MDF. Burner: 1.5 l with a continuous line of fire. Burning time: 2-5 h / l.

Assembly method: does not require assembly, it can be placed anywhere. Weight with packaging: 50 kg. Please use link below to order bioethanol fuel recommended to use with this fireplace. Scented Bioethanol fuel available here. When meeting new customers who are surprised by the new possibilities that ethanol fireplaces provide, I face the most basic question; How does ethanol fireplaces actually work?

Even though an actual product demonstration would answer the question, Ill try and answer the question with ink in this short article. The concept of an ethanol fireplace is a bit different from what we know in relation to gas or woodburning stoves. Ethanol fireplaces utilize bioethanol as a source of heat and flames.

As a result of the fuel, no chimney is needed and no soot or ashes is omitted when using the product. The flames are clean, and the fireplaces require little venting, if any is the room smaller than 20 sq. You will need to open the window after some time, if the room is larger youll be fine. Before actually using the fireplace, it has to be installed. As an ethanol fireplace require no flue, the installation is quite simple. The ethanol fireplaces are available in two different categories, wall-mounted or freestanding (bespoke solutions are made, but a professional will usually handle the installation). Wallmounted fireplaces are easily hung on a wall mount that comes with the fireplace.

The wallmount is in many cases the exact same as we know from flat screen tvs. Usually a safety distance of 1 m. Is required with a special attention to curtains.

For more information on the installation of wallmounted fireplaces. The freestanding fireplaces are the simplest model to install. Assembling the product is in most cases just a matter of placing the bioethanol burner inside the fireplace, and place the fireplace where you wish to use it. You dont need to put anything underneath the fireplace, and it can stand on wooden floors without any safety issues.

A safety distance of 1 m. Once the fireplace is mounted, you simply pour denatured bioethanol into the burner of the fireplace, and light it with a stove lighter.

After a few seconds, nice and yellow flames will appear. As the burner and the fuel increases in temperature, the flames will be more prominent. The fireplace produce a insignificant amount of CO2 and water (its that clean). The CO2 is easily handled with a window opened in a couple of minutes.

As the fireplace burns, it naturally creates some heat which is distributed into the room. The heat output is around 2.5-3.5 kW, which is the equivalent of a radiator, or half the amount of a woodburning stove (depending on how much wood is burned). The fireplaces can heat around 3-40 sq. The fireplaces burn around 4-5 hours and shut down fast when the fuel runs out. If you still want flames once the fireplace is extinguished, you can pour ethanol into the burner again once it has cooled off (typically takes 5-15 minutes). If the fireplace is burning and you are about to go outside or to bed, you can shut it off by closing the lid.

Once the flames are unable to consume oxygen, it shuts off. The excess ethanol will stay in the burner for next time. (Tip: If you want to light the fireplace again another day, it is a good idea to give it some extra fuel in effect it becomes a lot easier to ignite, and you increase the burning time).

This is simply put the basics of an ethanol fireplace, and it explains how an ethanol fireplace works. The item "Bio Ethanol Fireplace Biofire Fire B2C Professional Portal Unit BLACK WITH GLASS" is in sale since Friday, September 11, 2020. This item is in the category "Home, Furniture & DIY\Fireplaces & Stoves\Fireplaces".

The seller is "jumpingbugzy" and is located in Manchester, Greater Manchester. This item can be shipped to North, South, or Latin America, all countries in Europe.

• Colour: Black
• Custom Bundle: No
• Type: Fireplace
• MPN: Does Not Apply
• Brand: Fireplace
• Style: Contemporary
• Mounting: Corner
• Features: Variable Heat Control
• Unit Type: Unit
• Room: Any Room
• Fuel Type: Bio-ethanol
• Modified Item: No
• Power Source: Ethanol
• Mounting Location: Corner